Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SUPPLEMENTAL RESTRAINT SYSTEMS
AIRBAG SYSTEM - CHECK MODE PROCEDURE
- NOTICE:
- Enter "Signal Check" from the "DTC CHECK" screen displayed on the intelligent tester to clear the output DTCs (both present and past).
- HINT:
DTCs can be stored more sensitively in check mode than in normal diagnosis mode.
Perform the check mode inspection when a malfunction in each squib circuit is suspected even after the normal system code is output through normal diagnosis mode inspection.
CHECK MODE PROCEDURE (for Using an Intelligent Tester) |
Turn the ignition switch off.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / SRS Airbag / Utility / Signal Check / *.
- HINT:
- *: Follow the directions on the tester screen.