Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - HEATING / AIR CONDITIONING
AIR CONDITIONING PRESSURE SENSOR - REMOVAL
| 1. REMOVE FRONT BUMPER COVER |
for Standard:
()
w/ Winch:
()
| 2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM |
Start the engine.
Turn the A/C switch on.
Operate the cooler compressor while the engine speed is approximately 1000 rpm for 5 to 6 minutes to circulate the refrigerant and collect the compressor oil remaining in each component into the cooler compressor.
Stop the engine.
Recover the refrigerant from the A/C system using a refrigerant recovery unit.
| 3. REMOVE AIR CONDITIONER PRESSURE SENSOR |
Disconnect the connector.
Remove the pressure sensor.
Remove O-ring from the pressure sensor.
- NOTICE:
- Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.