Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - HEATING / AIR CONDITIONING
AIR CONDITIONING PANEL (w/o Multi-display) - REASSEMBLY
| 1. INSTALL CONTROL KNOB SUB-ASSEMBLY |
Attach the 10 claws to install the control knob sub-assembly.
| 2. INSTALL CENTER CLUSTER MODULE LENS |
Remove the double-sided tape from the control knob sub-assembly.
| *1 | Double-sided Tape |
Wipe off any tape adhesive residue with cleaner.
Remove the peeling paper from the new center cluster module lens.
- HINT:
- After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Install the center cluster module lens.
- NOTICE:
- Do not reuse the center cluster module lens after removing it.
| 3. INSTALL CENTER CLUSTER MODULE CIRCUIT |
- NOTICE:
- As the electronic parts of the circuit board may be damaged by static electricity, do not touch the electronic parts of the circuit board or the soldered areas with bare hands.
Install new packing.
Install the center cluster module circuit.
| 4. INSTALL LOWER HEATER CONTROL BASE |
Attach the 7 claws to install the lower heater control base.
Install the 2 screws.