Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SLIDING ROOF / CONVERTIBLE


SLIDING ROOF SYSTEM - DATA LIST / ACTIVE TEST

DATA LIST
  • HINT:
  • Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
  • NOTICE:
  • In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

Connect the intelligent tester to the DLC3.

Turn the engine switch on (IG).

Turn the intelligent tester on.

Enter the following menus: Body / Sliding Roof / Data List.

According to the display on the intelligent tester, read the Data List.

Sliding Roof
Tester DisplayMeasurement Item/RangeNormal ConditionDiagnostic Note
Open SwitchSliding roof switch open signal/ON or OFFON: OPEN switch is pressed
OFF: OPEN switch is not pressed
-
Close SwitchSliding roof switch close signal/ON or OFFON: CLOSE switch is pressed
OFF: CLOSE switch is not pressed
-
Up SwitchSliding roof switch tilt up signal/ON or OFFON: UP switch is pressed
OFF: UP switch is not pressed
-
Down SwitchSliding roof switch tilt down signal/ON or OFFON: DOWN switch is pressed
OFF: DOWN switch is not pressed
-
Hall IC1 StatusSliding roof operation signal/Normal or LockNormal: Sliding roof motor is operating
Lock: Sliding roof motor is not operating
-
Hall IC1 PulseSliding roof operation signal/Lo or HiLo: Sliding roof motor is not operating
Hi: Sliding roof motor is operating
-
Hall IC2 StatusSliding roof operation signal/Normal or LockNormal: Sliding roof motor is operating
Lock: Sliding roof motor is not operating
-
Hall IC2 PulseSliding roof operation signal/Lo or HiLo: Sliding roof motor is not operating
Hi: Sliding roof motor is operating
-
Door CourtesyDriver door courtesy light switch signal/ON or OFFON: Driver door is open
OFF: Driver door is closed
-
Ignition (MPX)Engine switch signal (MPX signal)/ON or OFFON: Engine switch on (IG)
OFF: Engine switch off
-
Ignition (Direct Signal)Engine switch signal/ON or OFFON: Engine switch on (IG)
OFF: Engine switch off
-
Door Handle Lock ButtonEntry lock switch/ON or OFFON: Entry lock switch is pressed
OFF: Entry lock switch is not pressed
-
Door Key Close OperationKey-linked sliding roof close signal/ON or OFFON: Driver door key cylinder is turned to lock position using key
OFF: Driver door key cylinder is not turned
-
Door Key Open OperationKey-linked sliding roof open signal/ON or OFFON: Driver door key cylinder is turned to unlock position using key
OFF: Driver door key cylinder is not turned
-
Wireless Open OperationWireless sliding roof open signal/ON or OFFON: Transmitter unlock switch is pressed
OFF: Transmitter unlock switch is not pressed
-
Wireless Close OperationWireless sliding roof close signal/ON or OFFON: Transmitter lock switch is pressed
OFF: Transmitter lock switch is not pressed
-
Key Off PermissionKey-off operation permit signal/ON or OFFON: Driver door is not closed within 45 sec. after engine switch is turned OFF
OFF: Any status except "ON" status
-
Door Key Related (Open)*Key-linked sliding roof open operation status/Avail or Not AvailAvail: Key-linked sliding roof open operation is available
Not Avail: Key-linked sliding roof open operation is not available
-
Door Key Related (Close)*Key-linked sliding roof close operation status/Avail or Not AvailAvail: Key-linked sliding roof close operation is available
Not Avail: Key-linked sliding roof close operation is not available
-
Wireless Key Rel (Open)*Transmitter-linked sliding roof open operation status/Avail or Not AvailAvail: Transmitter-linked sliding roof open operation is available
Not Avail: Transmitter-linked sliding roof open operation is not available
-
Wireless Key Rel (Close)*Transmitter-linked sliding roof close operation status/Avail or Not AvailAvail: Transmitter-linked sliding roof close operation is available
Not Avail: Transmitter-linked sliding roof close operation is not available
-
Door Handle Button Close*Entry lock switch-linked sliding roof close operation status/Avail or Not AvailAvail: Entry lock switch-linked sliding roof close operation is available
Not Avail: Entry lock switch-linked sliding roof close operation is not available
-
Door Key Related Operation*Direction for key-linked operation/Tilt or SlideTilt: Key-linked sliding roof operation operates tilt up or down
Slide: Key-linked sliding roof operation operates slide open or close
-
Wireless Key Rel Operation*Direction for Transmitter-linked operation/Tilt or SlideTilt: Transmitter-linked sliding roof operation operates tilt up
Slide: Key-linked sliding roof operation operates slide open
-
Down Switch Failure(Current)Down switch failure signal (Current)/Fail or Not FailFail: Sliding roof tilt down signal failure (Current)
Not Fail: Sliding roof tilt down signal not fail (Current)
-
Up Switch Failure(Current)Up switch failure signal (Current)/Fail or Not FailFail: Sliding roof tilt up signal failure (Current)
Not Fail: Sliding roof tilt up signal not fail (Current)
-
Close Switch Failure(Current)Close switch failure signal (Current)/Fail or Not FailFail: Sliding roof close signal failure (Current)
Not Fail: Sliding roof close signal not fail (Current)
-
Open Switch Failure(Current)Open switch failure signal (Current)/Fail or Not FailFail: Sliding roof open signal failure (Current)
Not Fail: Sliding roof open signal not fail (Current)
-
Down Switch Failure(Past)Down switch failure signal (Past)/Fail or Not FailFail: Sliding roof tilt down signal failure (Past)
Not Fail: Sliding roof tilt down signal not fail (Past)
-
Up Switch Failure(Past)Up switch failure signal (Past)/Fail or Not FailFail: Sliding roof tilt up signal failure (Past)
Not Fail: Sliding roof tilt up signal not fail (Past)
-
Close Switch Failure(Past)Close switch failure signal (Past)/Fail or Not FailFail: Sliding roof close signal failure (Past)
Not Fail: Sliding roof close signal not fail (Past)
-
Open Switch Failure(Past)Open switch failure signal (Past)/Fail or Not FailFail: Sliding roof open signal failure (Past)
Not Fail: Sliding roof open signal not fail (Past)
-
Number of Trouble CodesNumber of trouble codes / Min.: 0, Max.: 255Number of DTCs will be displayed-
  • HINT:
  • *: w/ Remote Function
ACTIVE TEST
  • HINT:
  • Using the intelligent tester to perform Active Tests allows relays, VSVs and actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

Connect the intelligent tester to the DLC3.

Turn the engine switch on (IG).

Turn the intelligent tester on.

Enter the following menus: Body / Sliding Roof / Active Test.

According to the display on the intelligent tester, perform the Active Test.

Sliding Roof
Tester DisplayTest PartControl RangeDiagnostic Note
Slide RoofOperate sliding roof SLIDE CLOSE/TILT UPClos/Up: Sliding roof SLIDE CLOSE or TILT UP operation occurs
OFF: Sliding roof is not operating
Be careful to avoid injuries as this test causes vehicle parts to move.
Slide RoofOperate sliding roof SLIDE OPEN/TILT DOWNOpen/Dwn: Sliding roof SLIDE OPEN or TILT DOWN operation occurs
OFF: Sliding roof is not operating
Be careful to avoid injuries as this test causes vehicle parts to move.