SIDE TURN SIGNAL LIGHT ASSEMBLY (for Outer Rear View Mirror) - INSPECTION

1. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH

Apply battery voltage to the connector and check the LED illumination condition.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 1
Battery negative (-) → 2 LED illuminates

If the result is not as specified, replace the side turn signal light assembly LH.

Text in Illustration
*a	Component without harness connected (Side Turn Signal Light Assembly LH)

2. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH

Apply battery voltage to the connector and check the LED illumination condition.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 1
Battery negative (-) → 2 LED illuminates

If the result is not as specified, replace the side turn signal light assembly RH.

Text in Illustration
*a	Component without harness connected (Side Turn Signal Light Assembly RH)

Measurement Condition	Specified Condition
Battery positive (+) → 1 Battery negative (-) → 2	LED illuminates