Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - LIGHTING EXT
REAR COMBINATION LIGHT ASSEMBLY - REMOVAL
- HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
| 1. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH |
Using a screwdriver wrapped with protective tape, detach the 6 claws and remove the 2 cover.
| *1 | Protective Tape |
Put protective tape around the rear combination light assembly LH.
| *1 | Protective Tape |
Remove the 2 bolts.
Detach the 2 clips and remove the rear combination light assembly LH.
Disconnect the connector.
| 2. REMOVE REAR COMBINATION LIGHT GASKET LH |
Remove the rear combination light gasket LH from the rear combination light lens and body LH.
| 3. REMOVE REAR TURN SIGNAL LIGHT BULB |
Detach the clamp.
Turn the socket in the direction indicated by the arrow in the illustration and remove the socket and rear turn signal light bulb.
Remove the rear turn signal light bulb from the socket.