Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - LIGHTING EXT
REAR COMBINATION LIGHT ASSEMBLY - INSTALLATION
- HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
| 1. INSTALL REAR TURN SIGNAL LIGHT BULB |
Install the rear turn signal light bulb to the socket.
Turn the socket in the direction indicated by the arrow in the illustration to install the socket.
Attach the clamp.
| 2. INSTALL REAR COMBINATION LIGHT GASKET LH |
Install the rear combination light gasket LH to the rear combination light lens and body LH.
| 3. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH |
Connect the connector.
Attach the 2 clips to install the rear combination light assembly LH.
Install the 2 bolts.
Attach the 6 claws and install the 2 covers.