Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - LIGHTING EXT

REAR COMBINATION LIGHT ASSEMBLY (for Double Swing Out Type) - INSTALLATION

  • HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH

Attach the claw.

Attach the 2 guide to install the rear combination light socket and wire sub-assembly LH.

2. INSTALL TAIL AND STOP LIGHT BULB
Rear Combination Light Assembly (For Double Swing Out Type) - Installation. LIGHTING EXT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the tail and stop light bulb to the rear combination light socket and wire sub-assembly LH.

Turn the rear combination light socket and wire sub-assembly LH in the direction indicated by the arrow in the illustration to install the socket.

3. INSTALL REAR TURN SIGNAL LIGHT BULB
Rear Combination Light Assembly (For Double Swing Out Type) - Installation. LIGHTING EXT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly LH.

Turn the rear combination light socket and wire sub-assembly LH in the direction indicated by the arrow in the illustration to install the socket.

4. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH
Rear Combination Light Assembly (For Double Swing Out Type) - Installation. LIGHTING EXT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Connect the connector.

Text in Illustration
*1Protective tape

Attach the 3 clips, 2 guides and 2 claws to install the rear combination light assembly LH.

  • NOTICE:
  • Attach the bolt installation bracket form outside the body while being careful not to bend it.

Install the 2 bolts.

LIGHTING EXT
Land Cruiser URJ200 URJ202 GRJ200 VDJ200
REAR COMBINATION LIGHT ASSEMBLY for Double Swing Out Type