Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - WINDOW / GLASS
POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on Driver Door Window Only) - PROBLEM SYMPTOMS TABLE
- HINT:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Inspect the fuses and relays related to this system before inspecting the suspected areas below.
| Symptom | Suspected Area | See page |
| Remote up/down function does not operate | Proceed to "Remote Up / Down Function does not Operate" | |
| Driver side power window does not operate with power window master switch | Proceed to "Driver Side Power Window does not Operate with Power Window Master Switch" | |
| Front passenger side power window does not operate with power window regulator switch | Proceed to "Front Passenger Side Power Window does not Operate with Front Passenger Side Power Window Switch" | |
| Rear power window LH does not operate with power window regulator switch | Proceed to "Rear Power Window LH does not Operate with Rear Power Window Switch LH" | |
| Rear power window RH does not operate with power window regulator switch | Proceed to "Rear Power Window RH does not Operate with Rear Power Window Switch RH" | |
| Driver side power window auto up/down function does not operate | Proceed to "Driver Side Power Window Auto Up / Down Function does not Operate with Power Window Master Switch" | |
| Key-off operation function operates even if operating conditions are not satisfied | Proceed to "Key-off Operation Function Operates even if Operating Conditions are not Satisfied" | |
| Auto up operation does not fully close power window (jam protection is activated) | Proceed to "Auto Up Operation does not Fully Close Power Window (Jam Protection Function is Activated)" | |
| Jam protection function does not operate | Proceed to "Jam Protection Function does not Operate" |