DESCRIPTION
INSPECTION PROCEDURE
CHECK BASIC FUNCTION (WIRELESS DOOR LOCK CONTROL SYSTEM AND POWER DOOR LOCK CONTROL SYSTEM)
CHECK MANUAL UP/DOWN FUNCTION
CHECK REMOTE UP/DOWN FUNCTION
POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on 4 Windows) - All Power Windows do not Operate with Driver Side Door Key Cylinder or Wireless Transmitter
DESCRIPTION
When a transmitter switch is pushed, the following occurs: 1) the door control receiver receives the transmitter signal; 2) the door control receiver sends a signal to the main body ECU; 3) the main body ECU sends the operation permission signal to the power window regulator motors; and 4) the power window motors are activated.
When the driver door key cylinder (key linked switch) is turned, the following occurs: 1) the door lock motor receives the signal; 2) the door lock motor sends the signal to the main body ECU; 3) the main body ECU sends the signal to the power window regulator motors; and 4) the power window motors are activated.
INSPECTION PROCEDURE
| 1.CHECK BASIC FUNCTION (WIRELESS DOOR LOCK CONTROL SYSTEM AND POWER DOOR LOCK CONTROL SYSTEM) |
Check that all the doors can be locked and unlocked with the wireless transmitter and the driver side door key cylinder (key linked switch).
Result| Result | Proceed to |
| All doors can be locked and unlocked with transmitter and driver side door key cylinder | A |
| All doors cannot be locked and unlocked with transmitter (w/ Entry and Start System) | B |
| All doors cannot be locked and unlocked with transmitter (w/o Entry and Start System) | C |
| All doors cannot be locked and unlocked with driver side door key cylinder | D |
| | GO TO WIRELESS DOOR LOCK CONTROL SYSTEM ()
|
|
|
| | GO TO WIRELESS DOOR LOCK CONTROL SYSTEM ()
|
|
|
| | GO TO POWER DOOR LOCK CONTROL SYSTEM ()
|
|
|
| 2.CHECK MANUAL UP/DOWN FUNCTION |
Check that all the power windows move when the manual up/down function of the master switch and regulator switch is operated ().
- OK:
- All power windows move.
| | OTHER PROBLEM (GO TO PROBLEM SYMPTOMS TABLE) ()
|
|
|
| 3.CHECK REMOTE UP/DOWN FUNCTION |
Check that all the power windows move when the remote up/down function of the master switch is operated ().
- OK:
- All power windows move.
| | OTHER PROBLEM (GO TO PROBLEM SYMPTOMS TABLE) ()
|
|
|
| OK | |
| |
| REPLACE MAIN BODY ECU (COWL SIDE JUNCTION BLOCK LH) |
|