Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - DOOR / HATCH
POWER BACK DOOR TOUCH SENSOR - INSTALLATION
| 1. INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH |
Attach the 2 clips to install the power back door sensor assembly LH.
Using a T25 "TORX" wrench, install the 6 screws.
Connect the connector.
| 2. INSTALL POWER BACK DOOR SENSOR ASSEMBLY RH |
- HINT:
- Use the same procedure described for the LH side.
| 3. INSTALL BACK DOOR GARNISH |
Attach the 14 clips to install the back door garnish.
| 4. INSTALL BACK DOOR SIDE GARNISH LH |
Attach the 3 clips and 2 claws to install the back door side garnish LH.
| 5. INSTALL BACK DOOR SIDE GARNISH RH |
w/o Power Back Door:
- HINT:
- Use the same procedure described for the LH side.
w/ Power Back Door:
Attach the clip and 4 claws to install the back door side garnish RH.
| 6. INSTALL CENTER BACK DOOR GARNISH |
Attach the 5 clips and 4 claws to install the center back door garnish.
| 7. INSTALL LOWER BACK DOOR STOPPER CUSHION |
Install the 2 lower back door stopper cushions with the 4 bolts.