LOW PITCHED HORN - INSPECTION

1. INSPECT LOW PITCHED HORN ASSEMBLY (for Spiral Type)

Apply battery voltage and check operation of the horn, as shown in the table.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Body ground Horn sounds

If the result is not as specified, replace the horn.

2. INSPECT LOW PITCHED HORN ASSEMBLY (for Standard)

Apply battery voltage and check operation of the horn, as shown in the table.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Body ground Horn sounds

If the result is not as specified, replace the horn.

Measurement Condition	Specified Condition
Battery positive (+) → Terminal 1 Battery negative (-) → Body ground	Horn sounds