Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - LIGHTING EXT
LIGHTING SYSTEM - CUSTOMIZE PARAMETERS
CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER |
- HINT:
- The following items can be customized.
- NOTICE:
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Customize Setting.
Select the setting by referring to the table below.
Display | Default | Contents | Setting |
Lighting Time | 15s | To change the lighting time after closing the door. (It will quickly fade out in the case of turning the ignition switch to ON). | 7.5s/15s/30s |
I/L when ACC OFF | ON | Function to light the interior light when the ignition switch is turned from ON to off. | ON/OFF |
I/L ON W/Door Key Unlock | ON | Function to light the interior light, etc. when the door is unlocked with a transmitter, door key or door lock control switch. | ON/OFF |
Room Light when Aprchd | ON | Dome light illumination (when approaching vehicle) | ON/OFF |
Disp Ex ON Sen | NORMAL | Function to change the level of ambient light at which the system dims lights such as the combination meter indicator light, the A/C indicator light and the clock light.*1 | LIGHT2/LIGHT1/NORMAL/DARK1/DARK2 |
Disp Ex OFF Sen | NORMAL | Function to change the level of ambient light at which the system cancels the dimming of lights such as the combination meter indicator light, the A/C indicator light and the clock light.*2 | LIGHT2/LIGHT1/NORMAL/DARK1/DARK2 |
Sensitivity | NORMAL | Function to adjust the ambient light sensitivity of the automatic light control system.*3 | LIGHT2/LIGHT1/NORMAL/DARK1/DARK2 |
Display | Default | Contents | Setting |
DRL Function | ON | DRL control. | ON/OFF |
Automatic High Beam | ON | Automatic high beam system | ON/OFF |
- HINT:
- The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.
System Setting | |||||
Setting | DARK2 | DARK1 | NORMAL | LIGHT1 | LIGHT2 |
- HINT:
- When the setting is closer to the "Light" side, the system dims the indicator lights even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before dimming the indicator lights.
System Setting | |||||
Setting | DARK2 | DARK1 | NORMAL | LIGHT1 | LIGHT2 |
- HINT:
- When the setting is closer to the "Dark" side, the system cancels the dimming of the indicator lights even when the surrounding area is relatively dark. When the setting is closer to the "Light" side, the system waits until the surrounding area is brighter before canceling the dimming of the indicator lights.
System Setting | |||||
Setting | DARK2 | DARK1 | NORMAL | LIGHT1 | LIGHT2 |
- HINT:
- When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.
CUSTOMIZING FUNCTION WITH MULTI-DISPLAY (w/ Multi-display) |
- HINT:
- The following items can be customized.
- NOTICE:
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Turn the ignition switch to ON.
Enter the following menus: Setup / Vehicle / Vehicle Settings / Vehicle Customization / Light Settings.
Select the setting by referring to the table below.
Display | Default | Contents | Setting |
Interior Lights Off Time | 15 s | This function controls the interior lights. | OFF, 7.5 s, 15 s or 30 s |
Light Sensor Sensitivity | 0 (middle bar) | Adjusts the ambient light sensitivity of the automatic light control system.* | -2, -1, 0, +1 or +2 |
Daytime Running Lights | ON | DRL control. | ON/OFF |
- HINT:
- The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.
System Setting | |||||
Setting | -2 | -1 | 0 | +1 | +2 |
- HINT:
- When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.