DISPOSE OF HOOD SUPPORT ASSEMBLY

Horizontally fix the hood support in a vise with the piston-rod pulled out.

Wear safety glasses. Gradually cut a part between A and B shown in the illustration using a metal saw and gradually release the gas.

• Standard Measurement:

• Area	Specified Condition
  a	150 mm (5.91 in.)
  b	20 mm (0.787 in.)

• CAUTION:

• As metal debris may be blown outward by the gas, you must:

• NOTICE:

• The gas inside the hood support is colorless, odorless and harmless. As there is a possibility that metal debris could scatter, cover the hood support with a piece of cloth or other material.