Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - LIGHTING EXT
HEADLIGHT ASSEMBLY (for LED Headlight) - REMOVAL
- HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
| 1. PRECAUTION |
- NOTICE:
- After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work ().
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().
| 3. REMOVE FRONT BUMPER COVER |
()
| 4. REMOVE FRONT FENDER MAIN SEAL LH |
Using a clip remover, detach the 3 clips and remove the fender main seal.
| 5. REMOVE HEADLIGHT ASSEMBLY LH |
Put protective tape around the headlight assembly LH.
| *1 | Protective Tape |
Remove the 4 bolts.
Disconnect the connectors and headlight assembly LH.