Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - LIGHTING EXT
BACK-UP LIGHT ASSEMBLY (for Double Swing Out Type) - REMOVAL
- HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
| 1. REMOVE REAR BUMPER COVER |
()
| 2. REMOVE BACK-UP LIGHT ASSEMBLY LH |
Remove the 2 nuts.
Detach the claw and remove the back-up light assembly LH.
| 3. REMOVE BACK-UP LIGHT SOCKET PLUG |
Turn the back up light socket plug in the direction indicated by the arrow in the illustration and remove the back up light socket plug.
| 4. REMOVE BACK-UP LIGHT BULB |
Remove the back-up light bulb from the back-up light socket plug.