Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - DOOR / HATCH
BACK DOOR OPENER SWITCH - INSTALLATION
A bolt without a torque specification is shown in the standard bolt chart ().
| 1. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY |
Connect the connector.
Install the back door opener switch assembly with the 2 screws.
- Torque:
- 5.0 N*m{ 51 kgf*cm, 44 in.*lbf}
| 2. INSTALL DOOR OPENING SWITCH SUB-ASSEMBLY (for Face to Face Seat Type) |
Attach the 2 claws to install the door opening switch sub-assembly.
| 3. INSTALL NO. 2 BACK DOOR SERVICE HOLE COVER (for Face to Face Seat Type) |
Connect the connector.
Attach the 4 claws to install the No. 2 back door service hole cover.
| 4. INSTALL ASSIST GRIP (for Face to Face Seat Type) |
Install the assist grip with the 2 screws.