Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - TIRE PRESSURE MONITORING
TIRE PRESSURE WARNING RESET SWITCH - INSPECTION
1. CHECK TIRE PRESSURE WARNING RESET SWITCH |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 1 (INT) - 2 (E) Released 10 kΩ or higher 1 (INT) - 2 (E) Pushed in Below 1 Ω
*a | Component without harness connected (Tire Pressure Warning Reset Switch) |
*b | Released |
*c | Pushed in |
If the result is not as specified, replace the tire pressure warning reset switch.