Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - REAR SUSPENSION
REAR STABILIZER BAR (w/o KDSS) - REMOVAL
| 1. REMOVE REAR WHEEL |
| 2. DISCONNECT REAR STABILIZER END BRACKET LH |
Remove the 2 bolts and disconnect the stabilizer end bracket.
| 3. DISCONNECT REAR STABILIZER END BRACKET RH |
- HINT:
- Use the same procedures described for the LH side.
| 4. REMOVE REAR STABILIZER BRACKET LH |
Remove the 2 bolts and bracket.
| 5. REMOVE REAR STABILIZER BRACKET RH |
- HINT:
- Use the same procedures described for the LH side.
| 6. REMOVE REAR STABILIZER BAR SUB-ASSEMBLY |
Remove the rear stabilizer bar from the vehicle.
Remove the 2 rear stabilizer bushes from the rear stabilizer bar.
| 7. REMOVE STABILIZER LINK SUB-ASSEMBLY LH |
Remove the nut, 2 retainers and 2 cushions, and bracket from the stabilizer link.
Remove the nut, bolt and stabilizer link.
| 8. REMOVE STABILIZER LINK SUB-ASSEMBLY RH |
- HINT:
- Use the same procedures described for the LH side.