Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - REAR SUSPENSION
REAR STABILIZER BAR (w/o KDSS) - INSTALLATION
| 1. INSTALL STABILIZER LINK SUB-ASSEMBLY LH |
Install the stabilizer link to the stabilizer bar with the bolt and nut.
- Torque:
- 48 N*m{ 489 kgf*cm, 35 ft.*lbf}
Install the 2 retainers, 2 cushions and bracket with the nut.
- Torque:
- 12 N*m{ 122 kgf*cm, 9 ft.*lbf}
| 2. INSTALL STABILIZER LINK SUB-ASSEMBLY RH |
- HINT:
- Use the same procedures described for the LH side.
| 3. INSTALL REAR STABILIZER BAR SUB-ASSEMBLY |
Install the 2 rear stabilizer bushes to the rear stabilizer bar.
Install the rear stabilizer bar.
| 4. INSTALL REAR STABILIZER BRACKET LH |
Install the stabilizer bar bracket with the 2 bolts.
- Torque:
- 56 N*m{ 571 kgf*cm, 41 ft.*lbf}
| 5. INSTALL REAR STABILIZER BRACKET RH |
- HINT:
- Use the same procedures described for the LH side.
| 6. CONNECT REAR STABILIZER END BRACKET LH |
Connect the stabilizer end bracket with the 2 bolts.
- Torque:
- 36 N*m{ 367 kgf*cm, 27 ft.*lbf}
| 7. CONNECT REAR STABILIZER END BRACKET RH |
- HINT:
- Use the same procedures described for the LH side.
| 8. INSTALL REAR WHEEL |
- Torque:
- for aluminum wheel:
- 131 N*m{ 1336 kgf*cm, 97 ft.*lbf}
- for steel wheel:
- 209 N*m{ 2131 kgf*cm, 154 ft.*lbf}