Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SUSPENSION CONTROL
HEIGHT CONTROL SENSOR (for Front Side) - REMOVAL
- HINT:
Use the same procedures for the RH side and LH side.
The procedures listed below are for the LH side.
1. CLEAN CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().
2. REMOVE FRONT WHEEL |
3. REMOVE FRONT FENDER APRON TRIM PACKING B |
w/ KDSS:
Remove the 3 clips and front fender apron trim packing B.
w/o KDSS:
Remove the 4 clips and front fender apron trim packing B.
4. REMOVE FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH |
Disconnect the connector.
Remove the nut, bolt and sensor.