REMOVE TAILPIPE ASSEMBLY

REMOVE CENTER EXHAUST PIPE ASSEMBLY

REMOVE HEIGHT CONTROL UNIT INSULATOR

DISCHARGE SUSPENSION FLUID PRESSURE

REMOVE NO. 7 HEIGHT CONTROL TUBE

REMOVE SUSPENSION CONTROL PUMP ACCUMULATOR ASSEMBLY

for 1GR-FE:

Remove the tailpipe ().

for 1UR-FE:

Remove the tailpipe ().

for 3UR-FE:

Remove the tailpipe ().

for 1VD-FTV:

Remove the tailpipe ().

for 1GR-FE:

Remove the center exhaust pipe ().

for 1UR-FE:

Remove the center exhaust pipe ().

for 3UR-FE:

Remove the center exhaust pipe ().

for 1VD-FTV:

Remove the center exhaust pipe ().

Remove the 3 bolts and insulator from the control unit.

Connect a hose to the bleeder plug for the height control accumulator and loosen the bleeder plug.

Discharge the suspension fluid pressure.

After the fluid pressure has dropped and oil has drained out, tighten the bleeder plug and remove the hose.

• Torque:
• 6.9 N*m{ 70 kgf*cm, 61 in.*lbf}

Using a union nut wrench, remove the control tube from the control valve and pump accumulator.

Remove the 3 nuts and pump accumulator.