Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - FRONT SUSPENSION
FRONT STABILIZER BAR (w/ KDSS) - INSPECTION
| 1. INSPECT FRONT STABILIZER LINK ASSEMBLY RH |
Temporarily install the nut, and flip the ball joint stud back and forth 5 times as shown in the illustration.
Use a torque wrench to turn the nut continuously at a rate of 2 to 3 seconds per turn. Take the torque reading on the fifth turn.
- Standard turning torque:
- 0.5 to 3.4 N*m (5.1 to 36 kgf*cm, 4.4 to 30 in.*lbf)
If the value is not within the specified range, replace the front stabilizer link with a new one.
Check the dust boot for cracks or grease leakage.