Using a 5 mm hexagon socket wrench, loosen the lower and upper chamber shutter valves of the stabilizer control with accumulator housing 2.0 to 3.5 turns.

Front Lower Suspension Arm - Removal. FRONT SUSPENSION. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

NOTICE:

When loosening a shutter valve, make sure that the end protrudes 2 to 3.5 mm (0.0787 to 0.137 in.) from the surface of the block, and do not turn the shutter valve any further.

Do not remove the shutter valves.

3. REMOVE FRONT WHEEL

4. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

Remove the 3 bolts and screw.

Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly LH.

5. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

Remove the 3 bolts and 2 screws.

Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly RH.

6. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Remove the 10 bolts and No. 1 engine under cover sub-assembly.

7. LOOSEN FRONT NO. 1 STABILIZER BRACKET LH

Loosen the 2 bolts of the front stabilizer brackets.

8. LOOSEN FRONT NO. 1 STABILIZER BRACKET RH

Loosen the 2 bolts of the front stabilizer brackets.

9. REMOVE FRONT STABILIZER LINK ASSEMBLY LH (w/ KDSS)

Remove the 2 bolts, nut and stabilizer link.

10. REMOVE FRONT STABILIZER LINK ASSEMBLY LH (w/o KDSS)

Remove the bolt, nut and stabilizer link.

11. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

Remove the bolt, nut and stabilizer link.

HINT:

If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.

12. DISCONNECT FRONT SHOCK ABSORBER WITH COIL SPRING LH

Remove the nut and bolt, and disconnect the shock absorber from the lower side.

13. DISCONNECT FRONT LOWER BALL JOINT ATTACHMENT LH

Remove the 2 bolts and disconnect the attachment from the steering knuckle.

14. REMOVE FRONT NO. 1 SUSPENSION ARM LOWER SUB-ASSEMBLY LH

Support the front suspension LH with a jack.

Place matchmarks on the No. 2 camber adjusting cam and No. 2 suspension toe adjusting plate.

Remove the nut, washer, No. 2 camber adjusting cam, camber adjusting cam assembly, bolt, toe adjusting cam, No. 2 suspension toe adjusting plate and front No. 1 suspension arm lower LH.

15. REMOVE FRONT LOWER BALL JOINT ATTACHMENT LH

Remove the cotter pin and nut.

Using SST, remove the lower ball joint attachment.

SST
09950-40011(09951-04010,09953-04020,09954-04010,09955-04031,09958-04011,09952-04010)
09955-04090

HINT:

Claw A 09955-04090

Claw B 09955-04031

FRONT SUSPENSION

Land Cruiser URJ200 URJ202 GRJ200 VDJ200

FRONT LOWER SUSPENSION ARM