Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SUSPENSION CONTROL

DESCRIPTION

INSPECTION PROCEDURE

CHECK FOR DTC (VEHICLE STABILITY CONTROL SYSTEM)

CLEAR DTC

CHECK DTC

DTC C1783 Speed Signal Communication Error

DESCRIPTION

The speed sensors monitor the speed of the wheels, and send appropriate speed signals to the suspension control ECU through the skid control ECU. If trouble occurs in either the front speed sensor or rear speed sensor, DTC (C1783) is output.

DTC CodeDetection ConditionTrouble Area
C1783A speed sensor circuit malfunction for 1 second or more.
Vehicle stability control system
Suspension control ECU

INSPECTION PROCEDURE

  • NOTICE:
Before performing troubleshooting, inspect the connectors of related circuits.
If the suspension control ECU or height control sensor is replaced, the vehicle height offset calibration must be performed ().
1.CHECK FOR DTC (VEHICLE STABILITY CONTROL SYSTEM)

Check if a speed sensor malfunction DTC is output under the vehicle stability control system ().

Result
ResultProceed to
DTC is not outputA
DTC is outputB
B
GO TO VEHICLE STABILITY CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) ()
A
2.CLEAR DTC

Clear the DTCs ().

NEXT
3.CHECK DTC

Check for DTCs.

Result
ResultProceed to
DTC C1783 is outputA
DTC C1783 is not outputB
B
USE SIMULATION METHOD TO CHECK ()
A
REPLACE SUSPENSION CONTROL ECU ()