ACTIVE HEIGHT CONTROL PUMP AND MOTOR - DISASSEMBLY

1. REMOVE HEIGHT CONTROL HOSE ASSEMBLY

Disconnect the clamp from the reservoir, then remove the 2 clips and hose.

2. REMOVE HEIGHT CONTROL CAP TO RESERVOIR HOSE

Remove the 3 clips, 2 breather plugs, and hose from the reservoir hose.

Pull the connector down to detach it and remove the hose from the reservoir tank.

3. DISCONNECT NO. 4 FRAME WIRE

Disconnect the 2 connectors, clamp and frame wire.

4. REMOVE HEIGHT CONTROL COMPRESSOR BRACKET ASSEMBLY

Remove the 3 nuts and bracket from the pump and motor.

5. REMOVE HEIGHT CONTROL RESERVOIR ASSEMBLY

Using a 5 mm hexagon wrench, remove the 5 bolts and reservoir from the pump and motor.

6. REMOVE NO. 1 HEIGHT CONTROL BOLT CUSHION

Remove the 3 bolt holders and 3 bolt cushions from the pump and motor.