INSPECT SUSPENSION CONTROL SWITCH

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Damping Force Control Switch

  Tester Connection	Switch Condition	Specified Condition
  5 (ECU2) - 16 (E)	COMF	Below 1 Ω
  	Except COMF	10 kΩ or higher
  6 (ECU1) - 16 (E)	SPORT	Below 1 Ω
  	Except SPORT	10 kΩ or higher

• Height Control Switch

  Tester Connection	Switch Condition	Specified Condition
  8 (LO) - 16 (E)	Down button of height control switch is pushed.	Below 1 Ω
  	Height control switch is not pushed or up button is pushed.	10 kΩ or higher
  7 (HI) - 16 (E)	Up button of height control switch is pushed.	Below 1 Ω
  	Height control switch is not pushed or down button is pushed.	10 kΩ or higher

• Height Control OFF Switch

  Tester Connection	Switch Condition	Specified Condition
  9 (N) - 16 (E)	Height control OFF switch is pushed.	Below 1 Ω
  	Height control OFF switch is not pushed.	10 kΩ or higher

If the result is not as specified, replace the suspension control switch.