STEERING LOCK SYSTEM - HOW TO PROCEED WITH TROUBLESHOOTING
Use the following procedures to troubleshoot the steering lock system.
*: Use the intelligent tester.
| 1.VEHICLE BROUGHT TO WORKSHOP |
| 2.INSPECT BATTERY VOLTAGE |
- Standard voltage:
- 11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
Check for DTC ().
Result| Result | Proceed to |
| DTC is output | A |
| DTC is not output | B |
Result| Result | Proceed to |
| Fault is not listed in problem symptoms table | A |
| Fault is listed in problem symptoms table | B |
| 5.OVERALL ANALYSIS AND TROUBLESHOOTING* |
Data List / Active Test ().