Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - STEERING GEAR / LINKAGE
STEERING LINKAGE - DISASSEMBLY
| 1. FIX POWER STEERING LINK ASSEMBLY |
Using SST, fix the power steering link in a vise.
- SST
- 09612-00012
- HINT:
- Tape SST before use.
- NOTICE:
- When using a vise, do not overtighten it.
| 2. REMOVE STEERING RACK BOOT CLIP LH |
Using pliers, remove the steering rack boot clip.
| 3. REMOVE STEERING RACK BOOT CLIP RH |
- HINT:
- Use the same procedures described for the LH side.
| 4. REMOVE STEERING RACK BOOT CLAMP LH |
Using pliers, remove the boot clamp as shown in the illustration.
- NOTICE:
- Be careful not to damage the steering rack boot.
| 5. REMOVE STEERING RACK BOOT CLAMP RH |
- HINT:
- Use the same procedures described for the LH side.
| 6. REMOVE NO. 1 STEERING RACK BOOT |
Remove the steering rack boot LH and RH.
| 7. REMOVE STEERING RACK END SUB-ASSEMBLY |
Using a wrench, hold the steering rack (LH side).
Using SST, remove the steering rack end (LH side) from the power steering rack.
- SST
- 09922-10010
- HINT:
- Rotate SST in the direction shown in the illustration.
Using SST, remove the steering rack end (RH side) from the power steering rack.
- SST
- 09922-10010
- HINT:
- Rotate SST in the direction show in the illustration.
- NOTICE:
Do not mistake the direction of SST.
Make sure to keep the power steering rack fixed in place with SST.