Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - STEERING COLUMN
STEERING COLUMN ASSEMBLY (for Power Tilt and Power Telescopic Steering Column) - REASSEMBLY
| 1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU |
Install the ECU with the 2 screws.
- Torque:
- 1.5 N*m{ 15 kgf*cm, 13 in.*lbf}
Connect the 2 connectors.
- NOTICE:
- The connectors on both ends of the wire harness between the telescopic motor and ECU are the same shape. When installing them, connect the connectors of the same color.
| 2. INSTALL STEERING LOCK ACTUATOR ASSEMBLY |
Temporarily install the steering lock actuator assembly with 2 new tapered-head bolts.
Tighten the 2 tapered-head bolts until the bolt heads break off.