POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM - Tilt and Telescopic Manual Switch Circuit

DESCRIPTION

The signals generated by operating the manual switch are sent to the multiplex tilt and telescopic ECU through the serial line.

1.READ VALUE USING INTELLIGENT TESTER (TILT AND TELESCOPIC MANUAL SWITCH)

Use the Data List to check if the tilt and telescopic manual switch is functioning properly.

Tilt & Telescopic
Tester Display	Measurement Item/Range	Normal Condition	Normal Condition
Tilt Up switch	Input state of tilt up by manual switch/ON or OFF	ON: Tilt up activated by manual switch OFF: Tilt up not activated by manual switch	-
Tilt Down Switch	Input state of tilt down by manual switch/ON or OFF	ON: Tilt down activated by manual switch OFF: Tilt down not activated by manual switch	-
Telesco Short Switch	Input state of telescopic short by manual switch/ON or OFF	ON: Telescopic short activated by manual switch OFF: Telescopic short not activated by manual switch	-
Telesco Long Switch	Input state of telescopic long by manual switch/ON or OFF	ON: Telescopic long activated by manual switch OFF: Telescopic long not activated by manual switch	-

Result
Result	Proceed to
"ON" is displayed on the intelligent tester screen when each switch is turned on. "OFF" is displayed on the intelligent tester screen when each switch is turned off.	A
"ON" is not displayed on the intelligent tester screen when each switch is turned on. "OFF" is not displayed on the intelligent tester screen when each switch is turned off.	B

B

REPLACE TILT AND TELESCOPIC MANUAL SWITCH ()

A

REPLACE MULTIPLEX TILT AND TELESCOPIC ECU ()