Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - STEERING COLUMN
POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM - PROBLEM SYMPTOMS TABLE
- HINT:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
The power tilt and power telescopic steering column system uses the CAN communication system, so check its diagnostic system before proceeding to troubleshooting.
If the problem still occurs when there is no abnormality in the related circuits, check the multiplex tilt and telescopic ECU and replace it if necessary.
| Symptom | Suspected Area | See page |
| Only manual switch does not operate | Tilt and telescopic manual switch circuit | |
| Headlight dimmer switch assembly*1 (tilt and telescopic manual switch) | ||
| Windshield wiper switch assembly*2 (tilt and telescopic manual switch) | ||
| Only auto away/return function does not operate | Check customization status of auto away function using intelligent tester | |
| Actuator power source circuit | ||
| IG power source circuit | ||
| Only auto away function does not operate | Entry and start system (for start function) | |
| Multiplex tilt and telescopic ECU | ||
| Only auto return function does not operate | Entry and start system (for start function) | |
| Multiplex tilt and telescopic ECU | ||
| Only memory function does not operate | Front power seat switch LH*3 or RH*4 (Position control ECU) | |
| Multiplex tilt and telescopic ECU |
- HINT:
- *1: for Headlight Dimmer Switch LH Side Type
- *2: for Headlight Dimmer Switch RH Side Type
- *3: for LHD
- *4: for RHD