Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - STEERING COLUMN


POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM - FAIL-SAFE CHART

  • HINT:
  • If the power source voltage to the tilt and telescopic ECU returns to normal within 10 seconds during tilt or telescopic operation, the operation will be resumed. If it returns to normal after 10 seconds have elapsed, the operation restarts when a tilt or telescopic operation signal is again input to the tilt and telescopic ECU.
Fail-safe Operation
DTC CodeDetection ItemFail-safe
B2602Key Unlock Warning Switch Circuit MalfunctionThe auto away function stops.
The auto return function:
Continues (when the engine switch is on (IG)).
Stops (when the engine switch is off).
B2603Tilt and Telescopic Manual Switch Circuit MalfunctionThe tilt and telescopic operation by the manual switch is suspended.
B2606Key Code Confirm Signal MalfunctionThe auto away or auto return function stops.
B2610Tilt Position Sensor or Tilt Motor Circuit MalfunctionThe tilt operation is suspended.
B2611Telescopic Position Sensor or Telescopic Motor Circuit MalfunctionThe telescopic operation is suspended.
B2620ECU Power Source Circuit MalfunctionThe tilt and telescopic operation is suspended.
B2624Speed Signal MalfunctionThe auto away and/or auto return function stops.
FAIL-SAFE FUNCTION

If a malfunction in the tilt position sensor signal or telescopic position sensor signal occurs while operating the power tilt or power telescopic function, the tilt and telescopic ECU stops the operation of the power tilt and power telescopic steering column system.

If the power source voltage to the ECU drops below approximately 8 V while operating the power tilt or power telescopic function, the ECU stops the operation of the power tilt and power telescopic steering column system.

If the tilt and telescopic ECU detects that the motor has locked during the operation of the power tilt or power telescopic function, the ECU stops the operation of the power tilt and power telescopic steering column system.

If the communication of an ECU that is related to the power tilt and power telescopic steering column system is interrupted, the tilt and telescopic ECU cannot control the functions listed below.

Tilt and Telescopic OperationMain Body ECU Communication InterruptionFront Power Seat Switch LH*1 or RH*2 (Position Control ECU) Communication InterruptionAll ECUs*3 Communication Interruption
Manual○*4○X*4
Auto away/returnX○X
Position memory (Memorization)XXX
Position memory (Reproduction)○*4XX
  • HINT:
○: Operates
X: Does not operate
*1: for LHD
*2: for RHD
*3: All ECUs that are related to the power tilt and power telescopic steering column system.
*4: The operation is permitted if the engine switch is on (IG) while the signal from the main body ECU is interrupted. The operation is prohibited if the engine switch is off while the signal from the main body ECU is interrupted.
STEERING COLUMN
Land Cruiser URJ200 URJ202 GRJ200 VDJ200
POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM