Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - POWER ASSIST SYSTEMS


POWER STEERING SYSTEM (for 1VD-FTV with DPF) - DIAGNOSTIC TROUBLE CODE CHART

  • HINT:
  • If a trouble code is output during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the "See page" below.
Power Steering System
DTC CodeDetection ItemReturn-to-normalSee page
C1541 Vehicle Speed Signal Malfunction After normal confirmation
C1544 High Engine Revolution Signal After normal confirmation
C15F0 VFC Solenoid Circuit Engine switch on (IG) again
C15F1 Steering Angle Sensor Circuit After normal confirmation
C15F2 VGRS System Malfunction After normal confirm
U0100 Lost Communication with ECM / PCM "A" After CAN communication system returns to normal condition or engine switch turned on (IG) again
U0126 Lost Communication with Steering Angle Sensor Module After CAN communication system returns to normal condition or engine switch turned on (IG) again
U0129 Lost Communication with Brake System Control Module After CAN communication system returns to normal condition or engine switch turned on (IG) again
U0130 Lost Communication with Steering Effort Control Module After CAN communication system returns to normal condition or engine switch turned on (IG) again
POWER ASSIST SYSTEMS
Land Cruiser URJ200 URJ202 GRJ200 VDJ200
POWER STEERING SYSTEM for 1VD-FTV with DPF