MULTIPLEX TILT AND TELESCOPIC ECU - REMOVAL

1. REMOVE STEERING COLUMN ASSEMBLY (TILT STEERING GEAR ASSEMBLY WITH MOTOR)

()

2. REMOVE STEERING LOCK ACTUATOR ASSEMBLY

Using a center punch, mark the center of the 2 tapered-head bolts.

Using a 3 to 4 mm (0.118 to 0.157 in.) drill, drill a hole in the 2 bolts.

Using a screw extractor, remove the 2 bolts and the steering lock actuator assembly from the steering column assembly.

3. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU

Disconnect the 2 connectors.

Remove the 2 screws and ECU.