Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - VARIABLE GEAR RATIO STEERING
PERFORM VGRS SYSTEM CALIBRATION
DTC C1592/52 Actuator Neutral Position Calibration Incomplete
DESCRIPTION
The steering control ECU first checks the actuator angle neutral position calibration flag after entering test mode. If the ECU detects that steering actuator angle neutral position calibration is incomplete twice, it will store DTC C1592/52.
| DTC Code | DTC Detection Condition | Trouble Area |
| C1592/52 | The steering control ECU detects that steering actuator angle neutral position calibration is incomplete twice. | Steering actuator Steering control ECU |
INSPECTION PROCEDURE
| 1.CLEAR DTC |
Clear the DTCs ().
| NEXT | |
| 2.PERFORM VGRS SYSTEM CALIBRATION |
Perform VGRS system calibration ().
| NEXT | |
| 3.CHECK DTC |
Check for DTCs ().
| Result | Proceed to |
| C1592/52 is output after VGRS system calibration has been performed 3 times or more | A |
| C15B2/72 is output (for LHD) | B |
| C15B2/72 is output ( for RHD) | C |
| DTC is not output | D |
- NOTICE:
- If DTC C1592/52 is output even though the VGRS system calibration has been performed, confirm the procedure again, and perform the VGRS system calibration 3 times or more.
|
| ||||
|
| ||||
|
| ||||
| A | ||
| ||