DESCRIPTION
INSPECTION PROCEDURE
CHECK DTC (CAN COMMUNICATION SYSTEM)
DTC B2621 Communication Interruption
DESCRIPTION
The multiplex tilt and telescopic ECU forms a network with the ECUs of other systems through the communication bus. Each ECU informs the other ECUs that it is connected to the network by outputting a specified signal (periodic signal) to the communication bus on a regular schedule. The multiplex tilt and telescopic ECU detects the connection of each ECU based on the signal.
| DTC Code | Detection Condition | Trouble Area |
| B2621 | The periodic signal from a specified ECU has stopped. | CAN communication system
Multiplex tilt and telescopic ECU
|
INSPECTION PROCEDURE
| 1.CHECK DTC (CAN COMMUNICATION SYSTEM) |
Check for DTCs of the CAN communication system (for LHD: , for RHD: ).
Result| Result | Proceed to |
| DTC is not output | A |
for LHD:
DTC is output | B |
for RHD:
DTC is output | C |
| | GO TO CAN COMMUNICATION SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) ()
|
|
|
| | GO TO CAN COMMUNICATION SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) ()
|
|
|
| A | |
| |
| REPLACE MULTIPLEX TILT AND TELESCOPIC ECU ()
|
|