Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 3UR-FE ENGINE CONTROL
THROTTLE BODY - ON-VEHICLE INSPECTION
| 1. CHECK THROTTLE BODY ASSEMBLY |
Check the throttle control motor operating sounds.
Turn the engine switch on (IG).
When depressing the accelerator pedal, check the operating sound of the running motor. Make sure that no friction noises are emitted from the motor. If friction noise exists, replace the throttle body.
Check the throttle position sensor.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester main switch on.
Enter the following menus: Powertrain / Engine and ECT / Data List / All Data / Throttle Sensor Volt %.
Depress the accelerator pedal. When the throttle valve is fully opened, check that the value of "Throttle Sensor Volt %" is within the specification.
- Standard throttle valve opening percentage:
- 60% or more
- HINT:
- When checking the standard throttle valve opening percentage, the shift lever should be in N.
If the percentage is less than 60%, replace the throttle body.