THROTTLE BODY - INSPECTION

1. INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY

Check the throttle valve.

Check that the throttle valve opens and closes smoothly.

Check that there is no sludge accumulating around the throttle body with motor assembly.

Check the throttle control motor.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (M-) - 2 (M+) 20°C (68°F) 0.3 to 100 Ω

Text in Illustration
*a	Component without harness connected (Throttle Body with Motor Assembly)

If the result is not as specified, replace the throttle body with motor assembly.

Tester Connection	Condition	Specified Condition
1 (M-) - 2 (M+)	20°C (68°F)	0.3 to 100 Ω