Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1VD-FTV STARTING

STARTER - INSTALLATION

  • NOTICE:
When replacing an injector (including interchanging injectors between cylinders) or common rail, replace the corresponding injection pipes with new ones.
w/DPF
When fuel lines are disconnected, air may enter the fuel lines, leading to engine starting trouble. Therefore, perform forced regeneration and bleed the air from the fuel lines ().
1. INSTALL STARTER ASSEMBLY

Install the starter with the 2 bolts.

  • Torque:
  • 80 N*m{ 816 kgf*cm, 59 ft.*lbf}
Starter - Installation. 1VD-FTV STARTING. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Connect the 2 starter hoses.

Text in Illustration
*1Yellow Mark

Attach the harness clamp and connect the wire harness.

Connect the starter wire with the nut.

  • Torque:
  • 20 N*m{ 200 kgf*cm, 14 ft.*lbf}

Connect the starter connector.

2. INSTALL EGR COOLER INSULATOR (w/ EGR System)
3. INSTALL FUEL COOLER ASSEMBLY (w/o DPF)

()


4. INSTALL EGR VALVE ASSEMBLY (w/ DPF)

()


5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
  • NOTICE:
  • When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().
1VD-FTV STARTING
Land Cruiser URJ200 URJ202 GRJ200 VDJ200
STARTER