Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1VD-FTV ENGINE CONTROL
POWER STEERING OIL PRESSURE SWITCH - ON-VEHICLE INSPECTION
1. INSPECT POWER STEERING OIL PRESSURE SWITCH |
Check the oil pressure switch.
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Powertrain / Engine / Data List / Primary / Power Steering Signal.
Start the engine.
Operate the steering wheel while idling, and read the value on the intelligent tester.
- OK:
Condition Specified Condition Power steering operation ON Power steering not operation OFF
If not as specified, check for DTCs (w/o DPF: , w/DPF: ). If the power steering system inspection results are normal and a DTC is not output, replace the power steering oil pressure switch.
Inspect the power steering system (w/o DPF: , w/DPF: ). If the power steering system inspection results are normal and a DTC is not output, replace the power steering oil pressure switch.