Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 3UR-FE ENGINE CONTROL

POWER STEERING OIL PRESSURE SWITCH - ON-VEHICLE INSPECTION

1. INSPECT POWER STEERING OIL PRESSURE SWITCH

Check the oil pressure switch.

Connect the intelligent tester to the DLC3.

Turn the engine switch on (IG).

Turn the intelligent tester main switch on.

Enter the following menus: Powertrain / Engine and ECT / Data List / All Data / Power Steering pressure.

Start the engine.

Read the value displayed on the intelligent tester.

  • OK:
  • ConditionSpecified Condition
    Power steering operatingON
    Power steering not operatingOFF

If the result is not as specified, check the wire harness and connector. If the wire harness and connector are normal, replace the power steering oil pressure switch.


3UR-FE ENGINE CONTROL
Land Cruiser URJ200 URJ202 GRJ200 VDJ200
POWER STEERING OIL PRESSURE SWITCH