Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1UR-FE ENGINE CONTROL
POWER STEERING OIL PRESSURE SWITCH - REMOVAL
| 1. REMOVE FRONT WHEEL |
| 2. REMOVE FRONT FENDER APRON TRIM PACKING A |
Remove the 3 clips and front fender apron trim packing A.
| 3. REMOVE FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH (w/ Active Height Control) |
Disconnect the connector.
Remove the nut, bolt and front height control sensor sub-assembly RH.
| 4. DRAIN POWER STEERING FLUID |
| 5. REMOVE POWER STEERING OIL PRESSURE SWITCH |
Disconnect the power steering oil pressure switch connector.
Using a 24 mm deep socket wrench, remove the power steering oil pressure switch.
Remove the O-ring from the power steering oil pressure switch.