OIL LEVEL SENSOR - REMOVAL

1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

Remove the 3 bolts and screw.

Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly LH.

2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

Remove the 3 bolts and 2 screws.

Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly RH.

3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Remove the 10 bolts and No. 1 engine under cover.

4. REMOVE NO. 2 ENGINE UNDER COVER

Remove the 2 bolts and No. 2 engine under cover.

5. DRAIN ENGINE OIL

Remove the oil filler cap.

Remove the 2 bolts and No. 2 engine under cover seal.

Remove the oil pan drain plug and gasket, and drain the engine oil into a container.

Install a new gasket and the oil pan drain plug.

6. DISCONNECT OIL COOLER PIPE ASSEMBLY

Remove the 2 bolts and disconnect the oil cooler pipe.

7. REMOVE ENGINE OIL LEVEL SENSOR

Disconnect the oil level sensor connector.

Remove the 4 bolts and oil level sensor.

Text in Illustration
*1	Cutting Position
*2	Supply Part

Cut off the gasket as shown in the illustration.

Remove the gasket from the oil level sensor.

After cutting away the parts of the gasket shown in the illustration, remove only the outer part of the gasket.