Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 3UR-FE ENGINE CONTROL
KNOCK SENSOR - INSTALLATION
| 1. INSTALL KNOCK SENSOR |
Install the 4 sensors with the 4 bolts so that the sensors are angled as shown in the illustration.
- Torque:
- 20 N*m{ 204 kgf*cm, 15 ft.*lbf}
- NOTICE:
- The acceptable installation angle of the sensor is between 10° upward and downward from the horizontal position.
| *A | for Bank 2 Sensor 1 |
| *B | for Bank 1 Sensor 1 |
| *C | for Bank 2 Sensor 2 |
| *D | for Bank 1 Sensor 2 |
 | Front |
 | Upper Side |
 | Rear |
Connect the 4 sensor connectors.
| 2. INSTALL NO. 1 ENGINE COVER |
| 3. INSTALL NO. 2 ENGINE COVER |
| 4. INSTALL INTAKE MANIFOLD |
()