Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1VD-FTV INTAKE / EXHAUST
INTAKE MANIFOLD - INSPECTION
| 1. INSPECT NO. 1 INTAKE MANIFOLD FOR FLATNESS |
Using a precision straightedge and feeler gauge, measure the warpage of the contact surface between the No. 1 and No. 3 intake manifold, and the No. 1 intake manifold and cylinder head.
- Maximum Warpage:
Item Specified Condition No. 3 intake manifold 0.10 mm (0.00394 in.) Cylinder head 0.10 mm (0.00394 in.)
If the warpage is more than the maximum, replace the No. 1 intake manifold.
| 2. INSPECT NO. 2 INTAKE MANIFOLD FOR FLATNESS |
Using a precision straightedge and feeler gauge, measure the warpage of the contact surface between the No. 2 and No. 3 intake manifold, and the No. 2 intake manifold and cylinder head.
- Maximum Warpage:
Item Specified Condition No. 3 intake manifold 0.10 mm (0.00394 in.) Cylinder head 0.10 mm (0.00394 in.)
If the warpage is more than the maximum, replace the No. 2 intake manifold.
| 3. INSPECT NO. 3 INTAKE MANIFOLD FOR FLATNESS |
Using a precision straightedge and feeler gauge, measure the warpage of the contact surface between the No. 3 and No. 1 intake manifold, the No. 3 and No. 2 intake manifold, and the No. 3 intake manifold and intake pipe.
- Maximum Warpage:
Item Specified Condition Intake pipe 0.10 mm (0.00394 in.) No. 2 and No. 3 intake manifold 0.15 mm (0.00591 in.)
If the warpage is more than the maximum, replace the No. 3 intake manifold.