Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1VD-FTV ENGINE CONTROL
INTAKE AIR TEMPERATURE SENSOR - INSPECTION
1. INSPECT INTAKE AIR TEMPERATURE SENSOR |
Partially immerse the sensor in water and warm up the water.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition 1 - 2 Approximately 20°C (68°F) 2.21 to 2.65 kΩ 1 - 2 Approximately 60°C (140°F) 0.55 to 0.61 kΩ
If the result is not as specified, replace the sensor.
- NOTICE:
- When checking the sensor in water, keep the terminals dry. After the check, wipe the sensor dry.