INSPECT IGNITION SWITCH ASSEMBLY

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Switch Condition	Specified Condition
  All combinations of all terminals	LOCK	10 kΩ or higher
  4 (AM1) - 2 (ACC)	ACC	Below 1 Ω
  4 (AM1) - 2 (ACC) 4 (AM1) - 1 (IG1) 5 (AM2) - 6 (IG2)	ON
  4 (AM1) - 1 (IG1) 4 (AM1) - 3 (ST1) 5 (AM2) - 6 (IG2)	START

If the result is not as specified, replace the switch assembly.