HEATED OXYGEN SENSOR - INSPECTION

1. INSPECT HEATED OXYGEN SENSOR

Measure the resistance according to the value(s) in the table below.

Standard Resistance (for Bank 1):
Tester Connection Condition Specified Condition
1 (HT1B) - 2 (+B) 20°C (68°F) 11 to 16 Ω
1 (HT1B) - 4 (E1) Always 10 kΩ or higher

Standard Resistance (for Bank 2):
Tester Connection Condition Specified Condition
1 (HT2B) - 2 (+B) 20°C (68°F) 11 to 16 Ω
1 (HT2B) - 4 (E1) Always 10 kΩ or higher

Text in Illustration
*A	for Bank 1
*B	for Bank 2
*a	Component without harness connected (Heated Oxygen Sensor)

If the result is not as specified, replace the heated oxygen sensor.