Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1GR-FE FUEL
FUEL PRESSURE PULSATION DAMPER - REMOVAL
| 1. DISCHARGE FUEL SYSTEM PRESSURE |
()
| 2. PRECAUTION |
- NOTICE:
- After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work ().
| 3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().
| 4. REMOVE INTAKE AIR SURGE TANK |
()
| 5. REMOVE FUEL PRESSURE PULSATION DAMPER ASSEMBLY |
Remove the fuel pressure regulator holder.
Pull the fuel pressure pulsation damper out of the fuel delivery pipe.
Remove the O-ring from the fuel pressure pulsation damper.